General Setting; Displaying The Time; Setting The Clock Display; Setting The Language (Cyrillic) - Alpine CDE-W235BT Owner's Manual

GENERAL:
*3
 CLOCK  CLOCK MODE  CYRILLIC  AUX
CLOCK ADJ
*4
SETUP  AUX NAME  INT MUTE
DISPLAY:
ILLUM  DIMMER  SCROLLTYPE
TUNER:
*6 *7
 REGIONAL  PI SEEK
AF
iPod:
IPOD LIST
Refer to "Audio Setup" on page 17.
CDE-W235BT only. Refer to "BLUETOOTH SETUP" on
page 26.
Refer to "Setting Time" on page 10.
Displayed only when AUX SETUP is set to ON.
CDE-W233R only.
Refer to "Turning AF (Alternative Frequencies) ON/OFF" on
page 12.
Refer to "Receiving RDS Regional (Local) Stations" on page 12.
Refer to "PI SEEK Setting" on page 13.
Refer to "Setting the Time to automatically Adjust" on page 13.
3
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF.)
5
Press and hold AUDIO/SETUP (CDE-W235BT only) for at
least 2 seconds or press SETUP (CDE-W233R only) to
return to normal mode.
Notes
• Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

General Setting

"GENERAL" is selected on the setup main menu in step 2.
*5
 PLAY MODE  DEMO
*8 *9
 AUTO CLOCK

Displaying the Time

This function controls clock on or off at power off. When the clock
function is set to ON, the unit will display clock at power off.
 Setting item: CLOCK
Setting contents:
OFF / ON (Initial setting)

Setting the Clock Display

You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
 Setting item: CLOCK MODE
Setting contents:
24H / 12H (Initial setting)

Setting the Language (CYRILLIC)

Set the language to be displayed on the unit.
 Setting item: CYRILLIC
Setting contents:
OFF (Initial setting) / ON
OFF:
English, Latin character
ON:
Russian, English

Setting the AUX SETUP Mode

You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
 Setting item: AUX SETUP
Setting contents:
AUX OFF / AUX ON (Initial setting)
AUX OFF:
When set to OFF, AUX source cannot be selected.
AUX ON:
Set to ON when a portable device is connected. If SOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.

Setting the AUX NAME Mode

You can change the AUX NAME display in the SETUP mode.
 Setting item: AUX NAME
Setting contents:
AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME
Note
• When the PORTABLE is set, PMD is displayed on the unit.
23
-EN