Bluetooth Operation (Cde-W235Bt Only); Setup Before Using; About Bluetooth; Before Using Bluetooth Function - Alpine CDE-W235BT Owner's Manual

BLUETOOTH Operation
(CDE-W235BT only)
Preset buttons
(1 through 3)
1
2
/ENTER
BAND/ABC SKIP Rotary encoder
The illustration is for CDE-W235BT.

Setup Before Using

About BLUETOOTH

BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
Home page (http://www.bluetooth.com).
Notes
• Depending on the BLUETOOTH version, a BLUETOOTH compatible
device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible devices
is not guaranteed. For handling of the BT compatible device, consult
your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop your
car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner's Manual of the connected
device(s).
• When you search this unit using the BLUETOOTH compatible phone,
the unit name is displayed as "Alpine CD Receiver" model name.

Before Using BLUETOOTH Function

Before using the BLUETOOTH function, the following settings need to
be made.
Preset buttons
(4 through 6)
How to connect to a BLUETOOTH
compatible device (Pairing)
For details on the control from a BLUETOOTH compatible device, refer
to the Owner's Manual of the BLUETOOTH compatible device.
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
1
AUDIO/SETUP
VIEW
2
3
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
2
3
Notes
• If the connection is unsuccessful, "FAILED" is displayed.
• After a successful pairing, the two devices should re-pair automatically
• Set "VISIBLE M" to VISI M ON to enable this unit to be recognised by a
• You can also manually pair the BLUETOOTH devices from this unit.
Set "HFP" or "AUDIO" to ON when you want to use
Hands-Free phone or BT Audio function. Refer to "Setting
the BLUETOOTH Connection (BT IN)" on page 26.
Note
• Before using BLUETOOTH function, it must be paired with this unit.
Refer to "How to connect to a BLUETOOTH compatible device
(Pairing)" on page 25.
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
Turn the Rotary encoder to change the head unit display
from "PAIR NO" to "PAIR YES" and then press ENTER.
If "PAIR NO" is selected, the connection will be cancelled.
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
Input the PIN code ("0000") in a BLUETOOTH compatible
device.
Note
• The PIN code is fixed as "0000".
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.
whenever the vehicle's ignition is turned ON. However, the re-pairing
may fail. If the auto re-pairing fails, try to pair manually.
BLUETOOTH compatible device, refer to "Setting the Visible Mode" on
page 27.
For details, refer to "Pairing a BLUETOOTH Device from the unit" on
page 27.
25
-EN