Remote Control - Danby DHCC6020 Owner's Manual

®
1. Power Button: Toggtes t heuniton/off,
2. Mode display area: lccn(s)=mpresent thecur-
rentmodeof operation,
3. Power Indicator light: Solidlight signiffas that
the unitisinoperation,
4, Fan Speed Icons: Shewswhich lanspeedis in
use(Higlv'Low).
5. Warning Indicator: Illuminates when theunit
entersa faultmode, ( seepg 13for detaits)
6, Water love! display: Shows thecurrent w ater
level o ftheinterna!bucket.
7. AmbientTemperatum and Humidity display:
Shows current m ornhumidity a nd/ortemperature con-
ditions, Also dLsplays erro_" codes whentheunitenters
a faultmode.
8. Fan Speed Button: Allemats b etweenHigh
andLowfanspeeds, N otusedduringhumldtfica_on
mode.
9, Timer Button: Usedtoiniiietee delayedstart
_on"timeor delayed stop"off".tim e.
®
6
!
\
® ®
10. Set humidity display: Displays the sethumid.
ity le_'elfor the Dehumidifieror Humidifier.
11, Decrease button: Used to adjustTimer set-
tings backwards(0.5/1hr. increments),
Used ts adjustHumidity set_ings backward (5% incre-
ments).
12, Timer Display: Shows the selected delayed
start or stop time,
13. Remote control sensor
14. Increase button: Used to adjustTimer sstUngs
fcrwerds (0,5/1hr. increments).
Used to adjust Humidity se_ings forward (5% incre-
ments).
15. Mode selection b.tton: This button is
pressed to aJternate between availabIe operating
modes.The symbotfor the mode(s) selected wilt
appear inthe LED display (see 'Display icons', on pg 7
for details},