Air Purification - Danby DHCC6020 Owner's Manual

The Air Purification mode is used to increase air qual_y by
reducing common household odors and allergens such as
pollen, pet dander and dust. Air purification can operate ind,-
viduatly or in conjunction with either the Dehumidifying or
Humidifying modes.
Starting the Air Purification mode.
1) Depress the 'Mode' button on the control panel until the
Air Purification icon is displayed in the LCD screen (Fig J).
2) When required, you can operate the Air Purification mode simulta-
neously with the Dehumidifier or Humidifier by continually pressing
the MODE button until the required combination of operating mode
icons appear in the LCD display. For example, Air
Purificaticrv'Dehumidifier (Fig K) or Air Purificatiorv'Humidifisr (Fig L).
3) It you have selected the Air Purification mode to operate in con-
junction with another mode, proceed to define the operating parame-
ters for the selected operation. (Please refer to 'Dehumidifier' on pg 9
or'Humidifier" on pg 10 for instructions).
4) Select the required bn speed (Higt'JLow) by depressing the fan
speed button. Please note: White operation the Air F'urif_cation mode
simultaneously with another mode, the fan speed selection will be the
same in all operating modes,.
5) Depress the power button to start the unit in Air Purification mode
at your specified settings.
Do not attempt to operate the Air Purification
mode in places such as a kitchen, garage, or
work shed as airbom grease and oil particles are
common in these environments and can damage
the appfiance.
Do not attempt to run the Air Purification mode
without the filter in place.
11
The Air Purification filter cannot be cleaned, and
therefore must be replaced.
The Air Purification filter should be replaced every
3 to 6 months depending upon usage anger ¢ondi-
lions.. Replace the Air Purification filtar only with
one that was specifically designed for use with this
appliance.
Replacement filters are available from the retailer
that the unit was purchased from, as well as any
Danby authorized parts distibution center. Please
call 1-800-263-2629 or visit www.Danby.eom to find
a location near you.