Disconnecting An Esata Device - Toshiba TECRA R700 User Manual

Connecting the eSATA device
To connect an eSATA device, follow the steps as detailed below:
1. Connect an eSATA cable to the eSATA/USB combo port.
Make sure the connector is properly aligned with the socket.
Do not try to force the connection, doing so can damage the connecting
pins.
1. eSATA/USB combo port
■
A connected eSATA device may not be recognized if it is connected to
the computer's eSATA/USB combo port while the computer is in Sleep
Mode or Hibernation Mode. If this occurs, disconnect the eSATA device
and then reconnect the device while the computer is turned on.
■
If you connect an eSATA device after the computer has already been
turned on, it will take about ten seconds for it to be recognized by the
computer.
Do not attempt to disconnect and reconnect the drive before this period
has elapsed.

Disconnecting an eSATA device

When you have finished using an eSATA device, you can follow the
procedures below in order to disconnect it:
1. Wait for the indicator light of an eSATA device to go out to make sure all
activity has stopped.
If you disconnect an eSATA device or turn off the power while the computer
is accessing the drive you may lose data or damage an eSATA device or
the drive.
User's Manual
Figure 3-13 Connecting an eSATA cable to the eSATA/USB combo port
PORTÉGÉ/TECRA R700 Series
1
2
2. eSATA cable
3-31