Pointing Device; Touch Pad - Toshiba TECRA R700 User Manual

Problem
You cannot read a file Check to ensure the required file is actually on the
MultiMediaCard
For further information, please refer to chapter 3,
Options.
Problem
MultiMediaCard error
occurs
You cannot write to a
MultiMediaCard
You cannot read a file Check to ensure the required file is actually on the

Pointing device

If you are using a USB mouse, you should also refer to both the
mouse
mouse.

Touch Pad

Problem
The Touch Pad does
not work.
On-screen pointer
does not respond to
pointing device
operation
User's Manual
Procedure
SD/SDHC/SDXC Card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
Remove the MultiMediaCard from the computer and
then reinsert it in order to ensure it is firmly
connected.
If the problem persists, then you should refer to the
documentation supplied with your MultiMediaCard
for further information.
Remove the MultiMediaCard from the computer and
check to ensure that it is not write protected.
MultiMediaCard that is inserted into the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
section in this chapter, and the documentation supplied with your
Procedure
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse.
Pressing FN + F9 to enable.
Pressing Touch Pad ON/OFF button to enable.
In this instance the system might be busy - Try
moving the mouse again after waiting a short while.
PORTÉGÉ/TECRA R700 Series
Hardware, Utilities and
USB
8-11