Writing Cd/Dvds - Toshiba TECRA R700 User Manual

1. Eject hole
Turn off the power before you use the eject hole. If the CD/DVD is spinning
when you open the disc tray, the CD/DVD could fly off the spindle and
cause injury.

Writing CD/DVDs

You can use the DVD Super Multi drive to write data to either CD-R, CD-
RW, DVD-R, DVD-RW, DVD+R, DVD+RW or DVD-RAM discs.
You can use the DVD Super Multi drive Double Layer to write data to either
CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL,
DVD+RW or DVD-RAM discs.
The TOSHIBA Disc Creator is provided as writing software with this
computer.
■
Please refer to the
of writable CD and DVD discs that can be supported by this computer.
■
Do not turn off the power to the optical disc drive while the computer is
accessing it as this may cause you to lose data.
■
To write data to CD-R/-RW media, use the TOSHIBA Disc Creator
feature that is installed on your computer.
■
When the power of the optical disc drive is off, the disc tray will not open
even if the eject button is pushed. Use the ODD to turn the power of the
optical disc drive on. Please refer to Chapter 5,
User's Manual
Figure 4-9 Manual release with the eject hole
Writable discs, chapter 2 for details about the types
PORTÉGÉ/TECRA R700 Series
1
Φ 1.0mm
Hot Keys.
4-17