Toshiba TECRA A11 User Manual page 91

6. Slide your fingernail or a thin object under the cover and lift it off.
1. Memory module cover
7. Align the notch of the memory module with that of the memory slot and
gently insert the module into the slot at about a 45 degree angle before
holding it down until the latches on either side snap into place.
1. Notch
2. Slot A
■
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer. Foreign metal objects can create a short circuit,
which can cause computer damage and fire, possibly resulting in
serious injury.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
User's Manual
Figure 3-10 Removing the memory module cover
Figure 3-11 Seating the memory module
Hardware, Utilities and Options
2. Screw
3. Slot B
1
2
1
3
2
3-27