Supply Specifications; Media - Toshiba B-SX5T Product Description

2. SUPPLY SPECIFICATIONS

2. SUPPLY SPECIFICATIONS
Information regarding the supply specifications contained in Product Description is essential to service
engineers. Detail specifications and other information on the media and ribbon are described in Supply
Manual by model. It is issued by and sent from TOSHIBA TEC H.Q (Sales Division) upon release of
new model or manual's revision. When purchasing the supplies locally, be sure to refer to the Supply
Manual for details. Use of non-specified media may shorten the print head life and result in problems
with bar code readability or print quality. Be sure to read carefully and understand the Supply Manual
since it also includes the details about notes, precision of the print start position, limitations on printing,
etc. When selling the products to VARs, instruct them to buy media and ribbons that the substances
described in the following precautions are not included

2.1 MEDIA

[B-SX4T]
Label dispensing mode
Item
Media pitch
Label length
Width including backing paper
Label width
(See NOTE 5.)
Gap length
Black mark length (Tag paper)
Effective print width
Effective print length
Print speed up/slow down area
Thickness
Max. effective length for on the fly issue
Maximum outer roll diameter
Roll direction
Inner core diameter
[B-SX5T]
Label dispensing mode
Item
Media pitch
Label length
Width including backing paper
Label width
(See NOTE 5.)
Gap length
Black mark length (Tag paper)
Effective print width
Effective print length
Print speed up/slow down area
Thickness
Max. effective length for on the fly issue
Maximum outer roll diameter
Roll direction
Inner core diameter
Batch mode
Label 10.0 – 1500.0 25.4 – 1500.0
Tag 10.0 – 1500.0
8.0 – 1498.0
30.0 – 112.0
( .)
See NOTE 5
2.0 – 20.0
Label 6.0 – 1496.0
Tag 8.0 – 1498.0
Label
Tag
Batch mode
Label 10.0 – 1500.0 25.4 – 1500.0
Tag 10.0 – 1500.0
8.0 – 1498.0
30.0 – 140.0
( .)
See NOTE 5
27.0 – 137.0
2.0 – 20.0
Label 6.0 – 1496.0
Tag 8.0 – 1498.0
Label
Tag
Strip mode
Rotary cutter (*2)
3"/sec., 6"/sec.: 38.0 - 1500.0
---- 3"/sec., 6"/sec.: 30.0 – 1500.0
23.4 – 1498.0 3"/sec., 6"/sec.: 32.0 – 1494.0 25.0 – 1494.0(*1)
50.0 – 112.0
27.0 – 109.0
2.0 – 10.0
10.0 – 104.0±0.2
21.4 – 1496.0 3"/sec., 6"/sec.: 30.0 - 1492.0
---- 3"/sec., 6"/sec.: 28.0 – 1498.0
1.0
0.13 – 0.17
0.15 – 0.29
1361.0
Ø200 (See NOTE 9.)
Inside
Ø76.2±0.3
Strip mode
Rotary cutter
38.0 - 1500.0
3"/sec., 5"/sec.: 30.0 – 1500.0
----
8"/sec.: 38.0 – 1500.0
23.4 – 1498.0 32.0 – 1494.0
50.0 – 140.0 30.0 – 112.0
2.0 – 10.0
10.0 – 128.0±0.2
21.4 – 1496.0 30.0 - 1492.0
3"/sec., 5"/sec.: 28.0 – 1498.0
----
8"/sec.: 36.0 – 1498.0
1.0
0.13 – 0.17
0.15 – 0.29
749.0
Ø200 (See NOTE 9.)
Inside
Ø76.2±0.3
2- 1
EO10-33013B
2.1 MEDIA
(Unit: mm)
Cut mode
Swing cutter
38.0 – 1500.0
25.4 – 1500.0
30.0 – 112.0
6.0 – 20.0
23.0 – 1492.0
23.4 – 1498.0
(Unit: mm)
Cut mode
Swing cutter
38.0 – 1500.0
25.4 – 1500.0
25.0 – 1494.0(*1)
30.0 – 140.0
27.0 – 109.0
6.0 – 20.0
23.0 – 1492.0
23.4 – 1498.0