Optional Kit - Toshiba B-SX5T Product Description

3. OPTIONAL KIT

3. OPTIONAL KIT
Option Name
B-4205-QM
Swing cutter
module
B-4205-QM-R
B-8204-QM
Rotary cutter
module
B-8204-QM-R
B-9904-H-QM
Strip module
(B-SX4T only)
B-9904-H-QM-R
Ribbon saving
B-9904-R/R2-QM
module
(B-SX4T only) B-9904-R2-QM-R
B-9700-PCM-QM
PCMCIA
interface board
B-9700-PCM-QM-R
Expansion I/O
B-7704-IO-QM
interface board
(B-SX4T only) B-7704-IO-QM-R
B-9700-LAN-QM
Built-in LAN
interface board
B-9700-LAN-QM-R
B-9700-USB-QM
USB interface
board
B-9700-USB-QM-R
B-9704-RFID-U1-US
B-9704-RFID-U1-EU
B-9704-RFID-H1-QM
B-9704-RFID-H1-QM-R
B-9704-RFID-U1-EU-R
RFID module
B-SX704-RFID-U2-
EU/AU/US/CN-R
B-4905-FF-QM
Fanfold Paper
Guide
B-4905-FF-QM-R
Wireless LAN
B-9700-WLAN-QM-R
Module
O: Installable
X: Not installable
NOTE: To purchase the optional kits, please contact the TOSHIBA TEC Head Quarters.
Type
B-SX4T/5T-
QQ/QP
Applicable Model
B-SX4T/5T-QM-R
O X
X O
O X
X O
O X
X O
O X
X O
O X
X O
O X
X O
O X
X O
O X
X O
O X
O O
X O
X O
O X
O O
X O
3- 1
(Revision Date: May 22, 2009)
Use
This cutter module uses a swing or rotary
cutter. It cuts backing paper of labels and tag
paper automatically in "Stop and cut" mode.
This strip module strips the label from the
backing paper with the take-up block and strip
block. When the rewinder guide plate is
attached, the tag paper and label with backing
paper are wound.
The ribbon saving module moves the print
head up and down by using a solenoid to save
the ribbon loss as far as possible.
This board enables use of the following
PCMCIA cards.
LAN card: 3 COM EtherLink® III
(recommended)
ATA card: Conforming to PC card ATA
standard
Flash memory card: 1MB and 4MB card
Installing this board allows connection to
external devices.
This board enables the printer to be used in a
LAN network.
Installing this board enables a connection with
a PC which has a USB interface.
Installing this module enables read and write
of RFID tags.
Applicable frequency band differs depending
on the module types:
U1-US: UHF, 902MHz to 928MHz
U1-EU/EU-R: UHF, 869.5MHz
H1-QM/QM-R: HF, 13.56MHz
U2-EU-R: UHF, 869.7-870.0MHz
U2-AU-R: UHF, 918.25-925.75MHz
U2-US-R (US): UHF, 902.75 to 927.5MHz
(AU): UHF, 918.25 to 925.75MHz
(TW): UHF, 922.25 to 927.25MHz
(KR): UHF, 910.4 to 913.6MHz
U2-CN-R: UHF, 920.625-924.375MHz
This is a paper guide exclusively used for
fanfold paper. Attaching it in place of the
standard paper guide allows the printer to
print on fanfold paper.
Installing this PC board allows a
communication by wireless LAN.
EO10-33013B
3. OPTIONAL KIT