Toshiba B-SX5T Product Description page 53

3. OPTIONAL KIT
To use this device, printer firmware V4.7 or greater is required. Upgrade the firmware to V4.5 or
greater, if necessary. For the downloading procedure, refer to Section 7 PROGRAM DOWN LOAD.
Note that a RAM clear needs to be performed after downloading, so print out the maintenance
counter and parameter settings prior to downloading. After performing a RAM clear, restore the
printer parameter settings to the former states.
Destination Code Setting should be performed in the system mode of the printer according to the
destination.
The countries where the use of this device is allowed are as follows:
Model Name
B-SX704-RFID–U2-US-R
(Serial Number:
2809Axxxxxx or later)
Specification:
The specification of the B-SX704-RFID-U2-EU/AU/US/CN-R is as follows.
Item
Module
Applicable standard
Frequency range
Center frequency
Output power (ERP)
Output power (Conducted)
Modulation method (RW→Tag)
Modulation method (Tag→RW)
Transmission speed (RW→Tag)
Transmission speed (Tag→RW)
Encoding (RW→Tag)
Encoding (Tag→RW)
Number of channels
Duty Cycle
Carrier sense feature
Environmental standard
Available RFID tags
Setting Frequency Band
US UHF 902.75 to 927.5MHz
AU UHF 918.25 to 925.75 MHz
KR UHF 910.4 to 913.6 MHz
TW UHF 922.25 to 927.25 MHz
EU: TOSHIBA TEC TRW-EUM-01 for Europe
AU: TOSHIBA TEC TRW-AUM-01 for Australia
US (Serial Number 2808Yxxxxxx and earlier):
TOSHIBA TEC TRW-USM-01 for U.S.A. and Canada
US (Serial Number 2809Axxxxxx or earlier):
TOSHIBA TEC TRW-USM-01 for U.S.A., Canada, Australia, South
Korea, Taiwan
CN: TOSHIBA TEC TRW-CNM-01 for CHina
EU: ETSI EN 300 220
AU: C-Tick AS.NZS 428(2003); A1
US: FCC Part15 Subpart C
TW: NCC (National Communications Commission)
LP2002 Low-power Radio-frequency Devices Technical Specifications
KR: KCC (Korea Communications Commission)
Radio Certification Standard No. 2008-26 Article 98
EU: 869.7 - 870.0MHz
AU: 918.25 – 925.75MHz
US: 902.75 – 927.5MHz
KR: 910.4 – 913.6 MHz
TW: 922.25 – 927.25 MHz
CN: 920.625 – 924.375MHz
EU: 869.85MHz
AU: 922MHz
US: 915.125MHz
KR: 912MHz
TW: 924.75MHz
CN: 922.5MHz
EU: Max. 5mW (Power class 7a)
10 - 100mW
DSB-ASK
Back scatter ASK
40kbps
40kbps
PIE
FM0
EU: 1
AU: 31 (Frequency Hopping)
US: 99 (Frequency Hopping)
TW: 21 (Frequency Hopping)
KR: 17 (Frequency Hopping)
CN: 16 (Frequency Hopping)
EU: Max. 100% (Class 4)
None
RoHS directive
EPC C1 Gen2, ISO-18000-6C
3- 6
(Revision Date: May 22,2009)
3.10 RFID MODULE: B-SX704-RFID-U2-EU/AU/US-R
Applicable Countries
U.S.A., Canada
Australia
South Korea
Taiwan
Specification
EO10-33013B