Manual Operation - Sanyo SAP-KRV123EH Technical & Service Manual

2. Manual Operation

OI-671-13EG
Operation with the Remote Control Unit (continued)
STEP 4
STEP 5
Check that the circuit breaker on the power panel is turned on and that the
NOTE
operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit do not meet your needs, press
the setting buttons as described below and change the settings as desired.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
To stop the air conditioner, press the ON/OFF operation button again.
STEP 2
STEP 3
STEP 1
Press the MODE selector button and select the desired
mode.
For heating operation
For dehumidifying operation
For cooling operation
For fan only operation
To start the air conditioner, press the ON/OFF operation
button.
Press the TEMP. setting buttons to change the temperature
setting to the desired temperature.
Adjustable temperature range:
30 °C max.
16 °C min.
Set the FAN SPEED selector button to the setting you want.
Press the FLAP button and set the airflow direction as
desired.
(Refer to "Adjusting the Airflow Direction" on page 21.)
→
→
→
→
or 86 °F max.
60 °F min.
13