Remote Control Unit - Sanyo SAP-KRV123EH Technical & Service Manual

Transmitter
QUIET button
FAN SPEED selector button
FLAP button
ON TIME
Advance button
setting
Return button
buttons
CANCEL button
SENSOR button
ADDRESS switch
Transmitter
QUIET button
ON/OFF operation button
1 HR. TIMER button
(1-HOUR OFF TIMER)
8

Remote Control Unit

Display
Temperature display
selector button
The illustration above pictures the remote control unit after the cover has
NOTE
been opened.
When you press the buttons on the remote control unit, the
in the display to transmit the setting changes to the receiver in the air
conditioner.
Sensor A temperature sensor inside the remote control unit senses the room
temperature.
Display Information on the operating conditions is displayed while the remote control
unit is switched on. If the unit is turned off, FLAP setting and FAN SPEED
setting are not displayed.
: When you press this button, the fan rotates slower than the fan
speed setting to provide a quieter operating sound.
This button is for turning the air conditioner on and off.
: When you press this button, regardless of whether the unit is
operating or stopping, the unit operates for one hour and then shuts
down.
Sensor
ON/OFF operation button
1 HR. TIMER button
Temperature setting buttons (TEMP.)
MODE selector button
NIGHT SETBACK button
HIGH POWER button
Advance button
Return button
CLOCK button
Time display selector button
ACL button
(Cover closed)
OFF TIME
setting
buttons
mark appears
OI-671-8-EG