Table of Contents
Advertisement
How to Use the Remote
Control Unit
Remote Control Unit
Installation Position
Mounting the Remote Control
Mounting screws
4 x 16 (included)
When Holding the Remote
Control Unit
OI-671-11EG
Using the Remote Control Unit (continued)
When using the remote control unit, always point the unit's transmitter head
directly at the air conditioner's receiver.
Air conditioner
(Indoor unit)
Remote control
The remote control unit may be operated either from a non-fixed position or
from a wall-mounted position. To ensure that the air conditioner operates
correctly, DO NOT install the remote control unit in the following places:
DO NOT
•
In direct sunlight
•
Behind a curtain or other places where it is covered
•
More than 8 m away from the air conditioner
•
In the path of the air conditioner's airstream
•
Where it may become extremely hot or cold
•
Where it may be subject to electrical or magnetic noise
•
Where there is an obstacle between the remote control unit and air
conditioner (since a check signal is sent from the remote control unit every
5 minutes)
Before mounting the remote control unit, press the ON/OFF operation button
Unit
at the mounting location to make sure that the air conditioner operates from
that location. The indoor unit should make a beeping sound to indicate that it
has received the signal.
Remote control
unit mount
To take out the remote control unit, pull it forward.
•
When using the remote control unit and during air conditioner operation,
the transmitter on the remote control unit should be pointed toward the
receiver on the indoor unit.
•
Make sure that there are no objects between the remote control unit and
receiver which could block the signal.
(Transmitter head)
unit
Rear side
Press
Set in
•
To prevent loss of the remote control
place
unit, you can connect the remote
control unit to the mount by passing
a string through the remote control
unit and attachment hole.
Receiver
Hole
11
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
