Setting The Time; Exterior Temperature - Renault Kangoo Handbook

CLOCK AND eXTeRIOR TeMpeRATURe
A
With the ignition on, the time and, de-
pending on the vehicle, exterior tem-
perature are displayed.

Setting the time

Setting clock A
On equipped vehicles, adjustment but-
tons 1 and 2 are used to set the clock.
Press button 1 to adjust the hours and
button 2 to adjust the minutes.
Setting clock B
Display the "clock" page on the instru-
ment panel by pressing one of the but-
tons on stalk 3.
1.66
1
2
After two seconds, the hours and min-
utes start flashing.
Press and hold the bottom button to
enter the hour setting mode.
When only the hours flash, press the
top button to scroll through them.
Press and hold the bottom button to
enter the minute setting mode.
When only the minutes flash, press the
top button to scroll through them.
Confirm by pressing and holding the
bottom button on stalk 3.

exterior temperature

On equipped vehicles, the exterior tem-
B
perature is displayed at A or at B. If it is
between – 3°C and + 3°C, the °C char-
acters flash (signalling a risk of ice).
3
If the power supply is cut (battery
disconnected, supply wire cut, etc.),
the clock must be reset.
We recommend that you do not
adjust these settings while driving.
air humidity and temperature, the
external temperature alone is not
sufficient to detect ice.
exterior temperature
indicator
As ice formation is related
to climatic exposure, local