To Change Channel Or Satellite; Sorting The Channel List; Satellite List - Manhattan Plaza ST 100 Instruction Manual

In INSTALL menu, go to Advance Search
Symbol Rate: Select option. If you select ALL it will scan with all the Symbol Rates applicable. To define the symbol rate,
select User Defined and press OK. A sub menu will pop up. Select and press OK on the symbol rates you wish to apply
and finally EXIT.
Start Freq: Using 0-9 keys enter the starting frequency here. The search will start from this frequency.
End Freq: Using 0-9 keys and enter the end frequency here. The search will stop after this frequency
Polarity: Select polarity.
Positioner: Select positioner if required. Configure this as described earlier.
Start: Press OK. Transponder search will start. Below Searching page will appear.
After the search for transponders has finished, it will start channel search automatically and
display the TV and Radio channels found.

TO CHANGE CHANNEL OR SATELLITE

There are two ways of changing channel or satellite described below. Press OK key and channel list will appear
on your screen.

SORTING THE CHANNEL LIST

Press Green key to sort channels alphabetically.
Press Yellow key to sort channels by Free To Air first followed by Scrambled.
Press Red key to return to normal list.

SATELLITE LIST

Press SAT key and the combined channel and satellite list will appear.
Antenna: Select antenna number.
Satellite: Select satellite name.
Search Mode: Select search option. Option + D includes data channels
 ALL - All Video and Radio channels.
 FTA - Free To Air Video and Radio channels
 ALL + D -All Video, Radio and Data channels.
Scan Freq: Select option. If you select ALL it will scan the complete frequency
related to the LNB type you have selected. To define the frequency, select User
Defined. This will allow you to enter the frequency on below menu lines.
Shows serial number of TP, Frequency, Symbol Rate (S/R) Polarity and FEC
found.
TO SELECT A CHANNEL WITHIN THE SAME SATELLITE
 Use CH and PAGE up / down keys to scroll through the list.
 Press OK on required channel
TO SELECT A CHANNEL FROM ANOTHER SATELLITE
 Use VOL up / down to change the list.
 Use CH and PAGE up / down to scroll through the list
 Press OK on required channel. If you are using antenna positioner, it
will automatically move to the required satellite. If you are using
DiSEqC switch, then it will switch to that antenna.
TO SELECT A CHANNEL FROM ANOTHER SATELLITE
 Use CH and PAGE up / down to scroll through the satellite list
 Press OK on required satellite, the channel list will change and the
cursor will also move to the channel list.
 Use CH and PAGE up / down to scroll through the channel list
 Press OK on required channel. If, you are using antenna positioner, it
will automatically move to the required satellite. If you are using
DiSEqC switch, then it will switch to that antenna.
9