Table of Contents
Advertisement
Digital Satellite Receiver
Owner's Manual
Free To Air / Common Interface / Go To X / USALS
CONTENTS
GENERAL SAFETY REQUIREMENTS
INTRODUCTION
Welcome to the world of Manhattan digital satellite receivers. Please read this manual
and the following general safety requirements carefully before installing your STB.
The Plaza XT is a high performance digital satellite receiver, supporting many different
requirements of broadcast standards worldwide. This STB includes the best possible
features as well as Blind Search together with the most up-to-date electronics hardware
and easy to use on-screen menu.
GENERAL SAFETY REQUIREMENTS
1.
WARNING: Do not install this equipment in a confined space such as a bookcase
or similar unit. Covering the ventilation openings with items such as newspapers,
tablecloths, curtains etc should not impede the ventilation.
2.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as vases, are placed on
apparatus.
3.
WARNING: The mains plug is used as disconnect device, the disconnect device
shall remain readily operable.
4.
Correct disposal of this product: This marking indicates that this product
should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
2
3
3
4
4
5
5
6
7
7
8
8
9
TO UPGRADE SOFTWARE VIA PC
9
10
10
11
11
11
11
11
12
12
13
13
14
14
14
14
15
15
15
2
Advertisement
Table of Contents
Related Manuals for Manhattan Plaza XT-F
Summary of Contents for Manhattan Plaza XT-F
-
Page 1: Table Of Contents
GENERAL SPECIFICATIONS INTRODUCTION Welcome to the world of Manhattan digital satellite receivers. Please read this manual and the following general safety requirements carefully before installing your STB. The Plaza XT is a high performance digital satellite receiver, supporting many different requirements of broadcast standards worldwide. -
Page 2: Connectors And Definition
CONNECTORS AND DEFINITIONS Please do not connect power to the STB until all other connections have been made. REMOTE CONTROL FUNCTIONS NOTE: POS Positioner key is active only in DiSEqC 1.2 mode. It is not active in USALS mode. C1: AC IN (Power Cord) Connect this to the power outlet (100-240 V AC 50/60 Hz) C2: ON Power on / off switch C3: TV OUT (UHF Output) Connect TV or VCR to this connector (OPTIONAL) C4: ANTENNA IN Connect TV antenna to this connector (OPTIONAL) -
Page 3: Selecting Output Signal To Tv
OSD Setting – Menu Color Configuration Time Setting Configuration Menu Items: Select an item to change its color. Time Mode: Select Manual to set the time manually. Red, Green, Blue: Enter with 0-9 keys or press left Auto mode is only possible after channels are tuned. / right to change color value Region/City: For Auto mode, select your location. -
Page 4: Searching Channels
Positioner --- USALS Configuration SEARCHING CHANNELS Press MENU key and go to INSTALL. Select Channel Search. Longitude, Latitude: Enter your location with 0-9 Channel Search Configuration and PAGE up / down keys. Example; London – Sat Search: Select Single if searching manually. Longitude = 0 and Latitude = 51.5N Select Multiple if searching all automatically. -
Page 5: Using Event Timer
Channel Search Blind Search – Transponders Channel Browser Operation To change channel: Use PAGE and CH up / down keys. Press OK on the required channel. Press OK again or press EXIT. To change satellite: Use SAT key and select satellite. -
Page 6: Electronic Program Guide
ELECTRONIC PROGRAM GUIDE (EPG) Favorite Ch Configuration To display correct EPG it is important to set the time first. Press red key, the following Add: Press green key on the required channel. menu will open. Favorite icon will appear against the name. Delete: Press red key on the channel to be TV EPG Guide Operation... -
Page 7: Editing Channel Pids
Sat/TP Edit --- Satellite Configuration Note: After ‘Lock’ is turned ‘On’, channels locked in edit menu will require a password to open. If STB lock is on, a password is required to operate any function. After applying Add: Press green key to display keyboard. Select new password, the default password is no longer operative. -
Page 8: Editing Tp In Channel Search
STB is not obstructed. RS-232 Transfer rate 115.2 Kbps 9 Pin D-sub type You have lost or forgotten your password --- Apply master password or contact your Manhattan dealer. RF-Modulator (OPTIONAL) RF-Connector 75 Ohm, IEC 169-2 Male/Female GENERAL SPECIFICATIONS... - Page 9 Physical Specifications Size (W X H X D) W 280 mm, H 48 mm, D 218 mm Weight (Net) Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice -------------------------------------------------------------------------------------------------- MASTER PASSWORD 6699 This is the master password for your STB.