Hard Disk - Bosch DVR 440 Installation And Operation Manual

Hide thumbs Also See for DVR 440:
Table of Contents

Advertisement

Digital Video Recorder 440/480 Series
6.6.6

Hard Disk

Figure 6.24 System - Hard disk
The Hard Disk menu gives access to settings that affect video retention as well as a means to
format the hard disk.
Bosch Security Systems
Overwrite allows the unit to continuously record, overwriting the oldest unprotected
video on the hard disk with newer video.
The Disk full warning sets the threshold as which point the unit triggers an alarm
indicating the drive is nearly full. This setting has no effect when Overwrite is in use.
By default, the disk has only one partition where Continous and Event recordings are
stored. This is the case when Event Partition is set to 0%.
The disk can be segmented into two partitions by setting the Event Partition to a value
greater than 0%. The first partition then stores video from Continuous Recording; the
second partition the events recording. The Event Partition specifies the percentage of
the hard disk dedicated to preserving video from Inputs and Motion.
Auto delete sets a time window outside of which all video will be deleted from the unit.
This function is primarily reserved to meet legal requirement in some jurisdictions.
Format erases all data from the selected partition.
Installation and Operation manual
Configuration menu | en
73
AM18-Q0605 | v2.0 | 2012.04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr 480Dvr 440 / dvr 480

Table of Contents