Table of Contents
Advertisement
Available languages
Available languages
CANISTER
HOSE
1. Open the canister hood.
2. Check to see that the dust bag is properly
installed. See BAG CHANGING for instructions.
3. Check to see that the motor safety filter is
properly installed. See MOTOR SAFETY FILTER
CLEANING for instructions.
HOOD AND TOOL STORAGE
COVER
It is normal for the canister hood and tool stor-
age cover to come off when opened further
than needed. Line up the hinge slots, insert the
hinges into the slots, and close the hood and
tool storage cover to reinstall.
I_
CAUTION
I Never open canister hood with the tool storage
cover open. This will help to prevent damage
from occurring to the canister hood and/or tool
storage cover.
1. Line up the hose
latch tab and
notch in canister
hood and insert
hose into canister
until it snaps in
place.
To remove: Lift
hose latch tab
upward and pull
up on hose.
Latch
Tab
Notch
Lock
Button
Handle
Quick
2. Insert handle
into wand until
lock button snaps
in place. Be sure
hose is not twisted.
To remove: Press
lock button and
pull up on handle.
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage.
Store hose in a loosely coiled position
so the hose covering is not stressed.
CAUTION
Moving Parts! To reduce the risk of personal injury, DO NOT
touch the agitator when the vacuum cleaner is ON. Contacting
the agitator while it is rotating can cut, bruise, or cause other
injuries. Always turn off and unplug vacuum cleaner from
electrical outlet before servicing.
Ise caution when operating this product near children.
Advertisement
Table of Contents
