Table of Contents
Advertisement
Setting Oven Controls
Adjusting
oven temperature
Your appliance
has been factory calibrated
and tested to
ensure an accurate baking
temperature.
For the first few
uses, follow your recipe times and temperature
recommendations
carefully. If you think the oven is cooking
too hot or too cool for your recipe times, you may adjust
the control so the oven cooks hotter or cooler than the oven
temperature
displayed.
The oven temperature
may be increased as much as +35°F
(+19°C)
or decreased
-35°F (-19°C) from the factory
calibrated
settings.
Example
m To increase (+) or decrease
(-) the oven
temperature
by 20°F:
1. Press and hold Bake keypad
until the control
provides
the 2nd audible
tone (about 6 seconds).
2. Enter 2 0 using numeric
keypad.
3. Press Flex Clean keypad
to toggle
between
plus (+) if
increasing
temperature
or minus (-) if decreasing
the
temperature.
These symbols
will show in the display.
4. Press STAR
t to accept
change.
Important
notes:
Oven temperature
adjustments
made will not change the
Broil or Flex Clean function
temperatures.
If the temperature
shows an adjustment
of -20°F, and a
+20°F
adjustment
is needed,
you can toggle
between
the
minus (-) or plus (+) in the display
when pressing
Flex
Clean keypad
(See step 3).
DO NOT USE oven thermometers
such as those found in
grocery
stores to check the temperature
settings inside
your oven. These oven thermometers
may vary as much
as 20 to 40°F degrees
from actual
temperatures.
The oven temperature
adjustment
may be made if your
oven control
has been set to display
°C (Celsius)
temperatures.
Minimum
and maximum
settings for
Celsius is plus (+) or minus (-) 19°C.
Restoring factory default settings
When
new, your appliance
left the factory
with
predetermined
oven control
settings. Over time, the user
may make changes
to these default
settings. The following
options
have user settings that may be modified
and may
have been set with changes since the appliance
was new:
• 12 or 24 hour display
mode
• Continuous
bake or 12-Hour Energy Savings
mode
• Silent or audible
control
• Oven temperature
display
(Fahrenheit
or Celsius)
• Oven temperature
adjustments
• Stored
recipes
Please remember
that if you choose to restore to factory
default
settings, ALL of the above user settings will be
restored
to factory
default
settings, the oven temperature
offset
will reset and any stored recipe information
will be
cleared.
Example
m To restore oven control to factory default
settings:
1. Press and hold 7 keypad
until acceptance
tone sounds
(about 6 seconds).
2. Press START. The control
has been reset with default
settings.
Operating
oven lights
The interior oven lights will automatically
turn ON when the
oven door is opened.
Press _
to turn the interior oven lights ON and OFF
whenever
the oven door is closed.
The interior
oven lights are located
on the rear wall of the
oven interior
and are covered
with a glass shield. The glass
shield protects
the bulb from high temperatures
and should
always
be in place whenever
the oven is in use.
To replace
the interior oven light, see Replacing oven lights
in the Care & Cleaning
section.
28
Advertisement
Table of Contents
