Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kenmore 790.9210
Summary of Contents for Kenmore 790.9210
- Page 1 Use & Care Guide Guía de uso y cuidada English / Español Model/Modelos: 790. 9210*, 9220*, 9230*, 9240* Kenmore ® Electric Range Estufa eléctrica * = color number, código de color P/N 316902008 Rev B Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A.
-
Page 2: Table Of Contents
Changing temperature display (F° or C°) ........15 Sears Service ................. back cover Kenmore Limited Warranty When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material and workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair. -
Page 3: Important Safety Instructions
Important Safety Instructions Read all instructions before using this appliance. This manual contains important safety symbols and Tip Over Hazard instructions. Please pay attention to these symbols and follow all instructions given. • A child or adult can tip the range and be killed. - Page 4 Important Safety Instructions NEVER cover any slots, holes or passages in Do not heat unopened food containers — the oven bottom or cover an entire oven rack with materials buildup of pressure may cause container to burst and such as aluminum foil. Aluminum foil linings may trap heat, result in injury.
- Page 5 Important Safety Instructions IMPORTANT INSTRUCTIONS FOR USING YOUR IMPORTANT INSTRUCTIONS FOR CERAMIC- COOKTOP GLASS COOK TOP MODELS • • • • • Know which knob controls each surface heating unit. • Do not cook on broken cook top — If cook top should Place a pan of food on the surface element unit before break, cleaning solutions and spillovers may penetrate turning it on, and turn the element off before removing...
-
Page 6: Product Record/Serial Plate Location
Important Safety Instructions IMPORTANT INSTRUCTIONS FOR CLEANING IMPORTANT INSTRUCTIONS FOR SELF- YOUR RANGE CLEANING OVENS Before manually cleaning any part of the • Clean in the self-cleaning cycle only the parts listed in range, be sure all controls are turned OFF and the range is this Use &... -
Page 7: Before Setting Oven Controls
Before Setting Oven Controls Oven vent location Types of oven racks flat handle under the left side of the contr under the left side of the contr under the left side of the control ol ol ol ol The oven vent is located under the left side of the contr under the left side of the contr oven rack panel... -
Page 8: Before Setting Surface Controls
Before Setting Surface Controls Using proper cookware Cookware material types The cookware material determines how evenly and quickly The size and type of heat is transferred from the surface element to the pan cookware used will bottom. The most popular materials available are: influence the radiant element power level Aluminum - Excellent heat conductor. -
Page 9: About The Ceramic Glass Cooktop
Before Setting Surface Controls About the ceramic glass cooktop Element On & Hot Surface indicator lights The ceramic cooktop has radiant surface elements located Your appliance is equipped with different types of surface below the surface of the glass. The design of the ceramic indicator lights that will glow on the control panel —... -
Page 10: Home Canning
Before Setting Surface Controls Types of cooktop surface elements Home Canning Be sure to read and observe all the following points when The ceramic glass cooktop has radiant surface elements home canning with your appliance. Check with the USDA located below the surface of the glass. The patterns on the (United States Department of Agriculture) website and be ceramic glass will outline the size and type of element sure to read all the information they have available as well... -
Page 11: Setting Surface Controls
Setting Surface Controls Radiant surface element settings The size and type of utensil used, and the amount and type of food being cooked will influence the surface element power level setting needed for best cooking results. The suggested settings found in Fig. 1 below are based when cooking with medium-weight aluminum pans with lids. -
Page 12: Dual Radiant Surface Element
Setting Surface Controls Dual radiant surface element (some models) To operate the dual radiant element: 1. Place correctly sized cookware on single radiant surface element. 2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer portions of the element (marked dual - See Fig. -
Page 13: Warm & Ready™ Zone
Setting Surface Controls Warm & Ready™ Zone (some models) Temperature selection - Refer to the warmer zone The purpose of the warmer zone is to keep hot cooked recommended food settings (See Fig. 3). If a particular foods at serving temperature. Use the warmer zone feature food is not listed, start with the medium level, and adjust as (See Fig. -
Page 14: Oven Control Functions
Oven Control Functions For satisfactory use of your oven, become familiar with the various key pad functions and features of the oven. Function indicator lights - These lights located above the functions will glow when the function is active. Oven control keypads 1. -
Page 15: Changing Temperature Display (F° Or C°)
Setting Oven Controls Changing temperature display (°F or °C) Setting Timer The electronic oven control is set to display °F (Fahrenheit) The timer allows you to track your cooking times without when shipped from the factory. The display may be interferring the cooking process. -
Page 16: Oven Lockout
Setting Oven Controls Setting Bake Oven Lockout Use the bake function whenever the recipe calls for baking The control may be programmed to lockout using normal temperatures. A reminder tone will sound the oven control key pads and oven door. when the set bake temperature is reached. -
Page 17: Setting Cook Time
Setting Oven Controls Setting Cook Time Use Cook Time to set the amount of time needed for To change the oven temperature or cook time after baking. The oven will turn on immediately and stop baking has started: automatically after the set cook time ends. 1. -
Page 18: Setting Delay Start
Setting Oven Controls Setting Delay Start Delay Start allows you to set a delayed starting time to the To change the oven temperature or cook time after oven baking or cleaning functions. baking has started: FOOD POISONING HAZARD. Do not let 1. -
Page 19: Broil
Setting Oven Controls Broil Use the broil function to cook meats that require direct exposure to flame heat for optimum browning results. The Broil function is factory preset to broil at 550°F. The suggested broil settings table (See Fig. 3) is provided for recommendations only. -
Page 20: Adjusting Oven Temperature
Setting Oven Controls Adjusting oven temperature Operating oven light (on some models) The interior oven light will automatically turn ON when the Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few oven door is opened. -
Page 21: Select Clean
Select Clean A self-cleaning oven cleans itself with high temperatures • Remove any excessive spillovers. Any spills on the oven (well above normal cooking temperatures) which eliminate bottom should be wiped-up and removed before starting soils completely or reduces them to a fine powdered ash a self-clean cycle. -
Page 22: Select Clean
Select Clean When Select Clean begins the cleaning cycle, the Delayed Start Select Clean motorized door latch mechanism will automatically start to To set Delay Start Select Clean: lock the oven door and the DOOR LOCKED indicator light 1. Be sure the oven is empty and ALL oven racks are DO NO DO NO DO NOT T T T T open the oven door when the DOOR... -
Page 23: Care & Cleaning
Care & Cleaning Cleaning recommendation table Surface type Recommendation For general cleaning, use hot, soapy water and a cloth. For more difficult soils and Control knobs built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30- Painted body parts Painted decorative trim 60 minutes. -
Page 24: Cooktop Maintenance And Cleaning
Care & Cleaning Cooktop maintenance Cooktop cleaning Consistent and proper cleaning is essential to maintaining DO NOT use a cooktop cleaner on a hot your ceramic glass cooktop. cooktop. The fumes can be hazardous to your health, and can chemically damage the ceramic-glass surface. Prior to using your cooktop for the first time, apply the recommended CookTop®... -
Page 25: Aluminum Foil And Utensils
Care & Cleaning Aluminum foil and utensils Cooktop cleaning NEVER cover any slots, holes or passages in the oven bottom or cover an entire oven rack with materials such as aluminum foil. Aluminum foil linings may trap heat, causing a fire hazard. Protective Liners —... -
Page 26: Replacing Oven Light
Care & Cleaning Cleaning oven bottom (on some models) Replacing oven light Be sure the range is unplugged and all parts Please note: are COOL before replacing oven light. Wear a leather- On some models the lower oven bake element is visible. faced glove for protection against possible broken glass. -
Page 27: Removing And Replacing Lift-Off Oven Door
Care & Cleaning Removing and replacing the lift-off oven door Oven door hinge To avoid possible injury when removing or locations replacing the oven door, follow the instructions below carefully and always hold the oven door with both hands positioned away from the door hinge area. -
Page 28: Before You Call - Solutions To Common Problems
Before You Call Solutions to common problems • Before you call for service, review the following list. It may save you time & expense. Possible solutions to these problems are provided with the problem listed: Problem Solution Poor baking results. •... - Page 29 Before You Call Solutions to common problems • Problem Solution Oven smokes excessively when broiling. • Incorrect setting. Follow broiling instructions in Setting Oven Controls section. • Be sure oven door is opened to broil stop position when broiling. • Meat too close to the broil element. Reposition the broil rack to provide proper clearance between the meat &...
- Page 30 Before You Call Solutions to common problems • Problem Solution Scratches or abrasions on cooktop • Coarse particles such as salt or hardened soils between cooktop and surface. utensils can cause scratches. Be sure cooktop surface and bottoms of utensils are clean before usage. Small scratches do not affect cooking and will become less visible with time.
-
Page 31: Master Protection Agreements
Protection Agreements Acuerodes de protección...