Vacuum Cleaner; Handle - Kenmore 116.31810 Use & Care Manual

Please pay special attention to these hazard alert boxes, and foffow any
_ instructionsgiven° WARNING statements alert you to such hazards as fire,
electric shock, burns and personal Injury. CAUTION statements alert you to
suchhazards as personal injury and/or property damacje_
iii
_i_ WARNING
Electrical Shock Hazard
DO NOT plug inlo the electrical supply
until the assembly is complete. Failure
to do so could result in eletrlcal shock or
injury.
Before assembling the vacuum cleaner,
check the PACKING LIST. Use this list to
verify that you have received all the
components of your new Kenmore
Vacuum cleaner.
HANDLE I
CAUTION
Do not overtighten.
Overtlghtenlng could strip the screw
holes_
Do not operate the vacuum cleaner
withoul the screw in place.
1. Remove the handle screw from the
body of the vacuum cleaner°
2. Position the handle assembly as shown
in the illustration,
3. Using a screwdriver, tighten handle
screw,,
NOTE: It may be necessary to adjust the
handle slightly.