Dryer Use; Starting Your Dryer; Loading; Drying And Cycle Tips - Kenmore Gas Dryer 110.7506 Use & Care Manual

DRYER USE
STATUS
Damp ! Cool Down
Wrink[_ Guard 0
Check Lint Screen 0
AUTO DRY CYCLES
Custom MODIFIERS OPTIONS
Program NormsI CasuaB
WrinMe
0 0 0 Guard
o
Est ,qsted Trn¢ Remaining
[ AJr,, C/_l_ ]
Jean_ \ UBtra
_-_D_Delieate
Air Dry 0 Heavy Duty
MANUALDRYCYCLES
0 Auto Temp Control
Med High
Medium 0 Loud
LOW _ 0 Soft
Extra Low _._/' O Off
%ice _°c SignaU VoUume
More I More
Time
Normal
(_) Less
(2)
Less Auto Dr},
Time LeveB
AIO D!y Cycles
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to folmow these instructions can result in death,
explosion, or fire,
The following is a guide to starting your dryer. Periodic references
to other sections of this manual provide more detailed
information.
1. Clean lint screen before or after each cycle. See "Cleaning
the Lint Screen."
2. Put laundry into dryer and shut door. See "Loading."
3. Select the cycle you want by pressing the selected cycle pad.
See "Cycles." The preset settings for Auto Dry or Manual Dry
will glow. The estimated or actual cycle time (in minutes) will
show in the display.
• The preset settings provide the recommended fabric care
for your selected cycle. For preset cycle settings, see
"Drying and Cycle Tips."
• If desired, you can change the Auto Dry (Estimated) time
by pressing AUTO DRY LEVEL until the desired level of
dryness and estimated dry time are displayed. The Auto
Dry Level saves you time by providing the best drying
results in the shortest time. Electronic sensors determine
the dryness level of your clothes. When your clothes are
almost dry, the drying time automatically changes from
estimated to the actual time remaining in your cycle. For
details, see "Modifiers."
Fire Hazard
No washer can completely remove oil
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
4.
5.
6.
NOTE: To change from an Auto Dry cycle to a Manual Dry
cycle, press MORE TIME or LESS TIME. The time
displayed will be the actual time.
• If desired, you can change the Manual Dry (Actual) time
by pressing MORE TIME or LESS TIME until the desired
time is displayed. See "Modifiers."
• For best fabric care, follow garment label instructions.
(OPTIONAL STEP) If desired, select OPTIONS. For more
details, see "Options."
(OPTIONAL STEP) If desired, set the SIGNAL VOLUME.
Press START. Be sure the door is closed.
• If you do not press START within 5 minutes of selecting
the cycle, the dryer will automatically shut off.
• If you wish to end your drying cycle after pressing START,
press STOP twice.
13