Installing The Display Closure Sensor - Dell Vostro V130 Service Manual
Hide thumbs
Also See for Vostro V130:
- Setup and features information (6 pages) ,
- Specifications (8 pages) ,
- Service manual (72 pages)
Table of Contents
Advertisement
Installing The Display Closure Sensor
NOTE: To remove or locate the display closure sensor, see
1.
Connect the flex cable connecting the display closure sensor board to the system board.
2.
Replace and tighten the screws that secures the display closure sensor to the computer.
3.
Install the battery.
4.
Install the
base
cover.
5.
Install the
Secure Digital (SD)
6.
Follow the procedures in
54
card.
After Working Inside Your
Removing the Display Closure
Computer.
Sensor.
Advertisement
Table of Contents
