Installing The Thermal Fan - Dell Vostro V130 Service Manual

Installing The Thermal Fan

NOTE: To remove or locate the heat sink and fan assembly, see
1. Place the fan into its slot on the computer.
2. Replace and tighten the screw to secure the fan to the computer.
3. Connect the thermal fan cable to the system board.
4. Install the system board.
5. Install the coin cell battery.
6. Install the card-reader
7. Install the keyboard.
8. Install the memory.
9. Install the LED cover.
10. Install the wireless wide area network (WWAN)
11. Install the wireless local area network (WLAN)
12. Install the audio board and the hard
13. Install the battery.
14. Install the base cover.
15. Install the Secure Digital (SD)
16. Follow the procedures in
34
board.
card.
card.
drive.
card.
After Working Inside Your
Removing the Thermal
Computer.
Fan.