Removing The Memory; Installing The Memory - Dell Vostro V130 Service Manual

Memory

Removing The Memory

1. Follow the procedures in
2. Remove the LED cover.
3. Use your fingertips to spread apart the securing clips on each end of the memory module connector until the
memory module pops up.
4. Remove the memory module from its connector on the system board by drawing the module from the system board
at 45-degree angle.
NOTE: To replace the memory, see

Installing The Memory

NOTE: To remove or locate the memory, see
1. Push the memory module into the memory slot.
2. Press the clips to secure the memory module to the system board.
3. Install the LED cover.
4. Follow the procedures in
Before Working On Your Computer
Installing The Memory.
Removing the
After Working Inside Your
Memory.
Computer.
41