11. Remove the speaker from the computer.
NOTE: To replace the speaker, see
Installing The Speaker
NOTE: To remove or locate the speaker, see
1.
Place the speaker into its slot on the computer.
2.
Tighten the screws that secure the speaker to the computer.
3.
Route the speaker cable back into its routing guide on the computer.
4.
Secure the speaker cable to computer, using the cloth tapes provided.
5.
Install the
audio board and the hard
6.
Install the
display closure
7.
Install the battery.
8.
Install the
base
cover.
9.
Install the
Secure Digital (SD)
10. Follow the procedures in
26
Installing The
Speaker.
Removing The
drive.
sensor.
card.
After Working Inside Your
Speaker.
Computer.