Installing The Wireless Local Area Network (WLAN) Card
NOTE: To remove or locate the WLAN card, see
1.
Insert the WLAN card into its connector at a 45–degree angle.
2.
Replace and tighten the screw that secures the WLAN card to the computer.
3.
Connect the black and white antenna cables to their respective connectors marked on the WLAN card.
4.
Install the battery.
5.
Install the
base
cover.
6.
Install the
Secure Digital (SD)
7.
Follow the procedures in
20
Removing The Wireless Local Area Network (WLAN)
card.
After Working Inside Your
Computer.
Card.