Dell Latitude 13 Service Manual: Display Closure Sensor

Hide thumbs
Back to Contents Page

Display Closure Sensor

Dell™ Latitude™ 13 Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Display Closure Sensor
NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
Before Working Inside Your
2. Remove the ExpressCard, if applicable.
3. Remove the
SD
card, if applicable.
4. Remove the
base
cover.
5. Remove the battery.
6. Remove the screw that secures the display closure board to the computer.
7. Carefully slide the white latch to disconnect the flex cable that connects the display closure sensor to the computer.
8. Remove the display closure sensor from the computer.
Replacing the Display Closure Sensor
To replace the display closure sensor, perform the above steps in reverse order.
Back to Contents Page
Computer.

   Related Manuals for Dell Latitude 13

Comments to this Manuals

Symbols: 0
Latest comments: