Installing A Hard Drive - Dell XPS 410 Service Manual

Hide thumbs Also See for XPS 410:
Table of Contents

Advertisement

 
3. Disconnect the power and hard drive cables from the drive.
1
power cable
 
4. Press in on the tabs on each side of the drive and slide the drive up and out.
1
tabs (2)
 

Installing a Hard Drive

 
1. Follow the procedures in
Before You
 
2. Remove the computer cover (see
 
3. Unpack the replacement hard drive, and prepare it for installation.
 
4. Check the documentation for the drive to verify that the drive is configured for your computer.
 
5. If your replacement hard drive does not have the hard drive bracket attached, remove the bracket from the old hard drive by unsnapping it from the
drive.
 
6. Snap the hard drive bracket onto the replacement hard drive.
 
7. Install the hard drive into the computer by sliding the drive into place until you feel it click into place.
1
hard drive
 
8. Connect the power and hard drive cables to the hard drive.
2
hard drive cable
2
hard drive
Begin.
Removing the Computer
Cover).
2
hard drive bracket

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents