Removing The Palm Rest - Dell Inspiron 1501 Service Manual
Hide thumbs
Also See for Inspiron 1501:
- Owner's manual (164 pages) ,
- Setup manual (2 pages) ,
- Setting up your computer (2 pages)
Table of Contents
Advertisement
Back to Contents Page
Palm Rest
Dell™ Inspiron™ 1501 Service Manual
Removing the Palm Rest
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Palm Rest
1. Follow the instructions in
Before You
2. Remove the optical drive (see
3. Remove the hinge cover (see
4. Remove the keyboard (see
5. Remove the display assembly (see
6. Remove the eleven remaining M2.5 x 8-mm screws from the bottom of the computer.
1
M2.5 x 8-mm screws (11)
7. Turn the computer top-side up and loosen the captive screw on the palm rest.
8. Disconnect the touch pad connector and the standby switch connector from the system board.
Begin.
Removing an Optical
Drive).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Display
Assembly).
Before Working Inside Your
Computer) before working inside the
Hide quick links:
Advertisement
Table of Contents
