Dell Latitude CPi A Service Manual page 8

  
 
    
This manual provides instructions for removing and replacing field-replaceable
components, assemblies, and subassemblies in your Dell Latitude portable
computer. Unless otherwise noted, each procedure in this chapter assumes
the following:


The computer and any attached peripherals are turned off, and the peripherals
are disconnected from the input/output (I/O) panel on the back of the
computer.


A part can be replaced by performing the removal procedure in reverse order.
When the display assembly is open nearly 180 degrees, use a book or something
similar to support it. The angle of the display assembly with respect to the
bottom case should never be allowed to exceed 180 degrees. Also, when
performing the procedures in this manual, the locations or directions relative
to the computer are as shown in Figure 1 unless otherwise specified.
left side
back of computer
front of computer
Dell Latitude CPi A Service Manual
right side
1