Dell Latitude CPi A Service Manual page 44

processor-module fence
slot
one-slot hold-down clip
processor-module fence
slots
two-slot hold-down clip
7 . Remove the three screws that secure the processor module to the system
board.
8. Use a processor extractor tool to remove the processor module.
The tool fits on the left side of the module, in the notches.
9. Remove the air flow duct.
10. Verify that the PC Card ejectors do not extend from the PC Card bay.
11. Remove the 2.5-mm screw from the center of the computer's left rear foot.
Dell Latitude CPi A Service Manual 37