Dell Latitude CPi A Service Manual page 46

+,  -
1. Remove the back cover assembly.
2. Remove the keyboard assembly.
3. Remove the palmrest assembly.
4. Disconnect the exhaust fan power cable from connector J10 on the system
board.
5. Remove the two 12-mm screws securing the exhaust fan, and then remove
the exhaust fan.
NOTE: When you replace the exhaust fan, orient the fan so that the fan label
faces outward and the power cable is at the upper-right corner of the fan (when
viewed from the back of the computer). (This prevents the fan wires from being
pinched when you reassemble the computer.) Make sure that the wires are
routed under the upper EMI shield.
exhaust fan power cable
connector (JFAN1)
Dell Latitude CPi A Service Manual
12-mm screws (2)
exhaust fan
39