Clarion CZ509A Owner's Manual page 21

Bluetooth Operations
● AUTO ANS
This is a setting to determine whether any
incoming call will be automatically or manually
answered.
∗ The factory default setting is "OFF".
2-1. Select "AUTO ANS".
3-1. Press the [ ] or [
or "OFF".
ON: Any incoming call is automatically
answered in 5 seconds.
OFF: User needs to manually answer the
call.
● AUTO CONNECT
This function allows the Bluetooth to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗ The factory default setting is "OFF".
2-1. Select "AUTO CON".
3-1. Press the [ ] or [
or "OFF".
ON: Automatic connection is enabled.
OFF: Automatic connection is disabled.
● PASS KEY
This PASS KEY is used during pairing mode. A
maximum of 10 digits can be changed through
the car stereo.
∗ The factory default PASS KEY is "1234".
2-1. Select "PASS KEY".
3-1. Press the [ ] button.
4-1. Press the [x] or [v] button to remove
the cursor.
5-1. Press the [ ] or [
desired digits.
6-1. Press and hold the [
store in memory.
∗ If press the [BND] button, the pass key
returns to the factory default setting.
● ADDRESS
This will hold the unique Bluetooth address. The
address is 12 figures.
2-1. Select "ADDRESS".
The Bluetooth address 6 figures appears in
the display.
3-1. Press the [ ] or [
● Bluetooth Name
This will display the name of the Bluetooth.
2-1. Select "BT NAME".
The Bluetooth name appears in the display.
22
CZ509A
] button to select "ON"
] button to select "ON"
] button to select the
] button (2 sec.) to
] button to display.
● Bluetooth Firmware version
This will display the Firmware version of the
Bluetooth.
2-1. Select "BT FW".
The Bluetooth Firmware version appears in
the display.