Telephone Operations; Placing A Call; Answering A Call; Last Number Redial - Clarity C4210 User Manual

24

TELEPHONE OPERATIONS

Placing a Call

1. Press the TALK button (TALK button will
illuminate GREEN) and dial the number you
wish to call.
2. To end the call press the TALK button or place
the handset in the base.
Or
1. Press the keys of the numbers needed to dial.
The LCD will display PREDIAL and the
keys pressed.
2. Press the TALK button. Handset will go off-
hook and dial the displayed numbers.

Answering a Call

If the handset is out of the cradle, press the
TALK button.
If the handset is in the cradle with Auto-Connect
Mode ON, lift the handset.The handset will be in
receiver mode.
If the handset is in the cradle with AutoConnect
mode OFF, lift the handset.The handset will be in
standby mode. Press TALK button to receive
the call.
Refer to BOOST Clarity Power and Volume Control
for information on adjusting volume controls on
Page 19.

Last Number Redial

The last number dialed (up to 32 digits) is stored in
the redial memory until another number is dialed.
To use this feature:
1. Press the TALK button.
2. When you hear the dial tone, press the
RD/P button.
3. The phone will automatically dial for you.