Clarity C4220 Quick Start Manual

C4220
Base

HOW TO CONNECT YOUR C4220 PHONE

120V power
outlet
AC adapter
AC adapter connects
to 120V power source
and phone

TYPICAL TABLE-TOP INSTALLATION

The phone cord plugs into the C4220 phone base as shown above. Plug the
other end of the phone cord into a telephone wall jack.
Connect the AC adapter to the back of the base and a 120V wall outlet as
shown above.

WALL-MOUNT INSTALLATION

1
RJ11 wall plate (not provided)
3
Use short phone cord

Quick Start Guide

Customer Service: 1-800-552-3368
Battery
compartment
cover
Handset
Phone wall jack
Long phone cord
Notches A and B fit on the screw-
A
posts of the RJ11 wall-mount phone
jack. Connect the (short) phone cord
B
to the back of the phone and to the
phone jack as shown to the left.
2
4
www.clarityproducts.com
Long
phone cord
Short
phone cord
Battery pack
1 Ringer Style button – Press
to control the ringer tone and style.
2 Volume – Press to control the
speaker and ringer volumes.
3 Ringer Style LED light –
LED will light up when ringer
is activated.
4 Power LED – LED will light up
when the power is on.
5 In Use LED – LED will light up
when the phone is in use.
6 Charge LED – LED will light up
when handset is in base charging.
7 Page button – Press to Page handset.
1
2
AC adapter
Belt clip

BASE FEATURES

3
4
5
6
1 7