Handset Ringer; Pulse/Tone; Flash; Mute - Clarity C4210 User Manual

FEATURE SET UP

Handset Ringer

Set the switch marked Ringer OFF/VIBE/ON located
on the side of the handset.When VIBE is selected
the handset will ring and vibrate when receiving and
incoming call. The ringer switch must be set to ON
or VIBE for the handset
to ring.
Note: If both handset and base ringers are set to
OFF, the visual ringer will flash to indicate there is an
incoming call.

Pulse/Tone

Slide the switch to the type of telephone service you
have;TONE for touch-tone service or PULSE for
rotary dialing. Please check with your local telephone
company if uncertain of the type of service.

Flash

The FLASH button is activated to use custom calling
services such as Call Waiting or Three-Way Calling.
Please contact your local telephone company for
information on these services.

Mute

The MUTE button allows the user to conduct a
private conversation that you do not want the
person on the other end to hear.While in the mute
mode, the MUTE button will illuminate RED and the
microphone in the handset is disabled. Pressing the
MUTE button again will disengage the MUTE feature.

Redial/Pause

Press the RD/P button to redial the last number
dialed. Pressing the RD/P button while storing a
telephone number will insert a four (4) second
pause. This is commonly used when storing both the
telephone number and an extension or PIN number.
20