Install Two Simms; Insert Module Into Simm Connector; Pivot Module Down To Seat - Compaq StorageWorks RAID Array 3000 Controller Shelf Hardware User's Manual

4.2.4 Install Two SIMMs into Second Controller
1. Install two of the SIMM modules into the second controller (make sure all SIMM
modules are of the same type) by aligning the connector pins and inserting the
modules into the SIMM module connectors as shown in Figure 4-5.
Figure 4-5. Insert Module into SIMM Connector
2. Ensure the module is firmly seated and then gently pivot it toward the controller
board until it snaps into place as shown in Figure 4-6.
Figure 4-6. Pivot Module Down to Seat
EK–SMCPQ–UG. C01
Chapter 4. Second Controller Option
4-7