Wx Xm Weather Overview; Locate The Wx Weather Feature; Turn On Wx Weather Feature - AvMap EKP IV Manual

Wx xm weather manual

Hide thumbs Also See for EKP IV:

Table of Contents

1 WX XM WEATHER OVERVIEW

The WX WEATHER feature is located in the SYSTEM SETUP MENU and enables the user to activate the

Weather function and select what products should be seen on the Moving Map.

Connect the Receiver to the serial socket in the upper left part of the EKP IV or to the TMC port of the

GPII+ and set WEATHER DATA to ON. The XM WEATHER ABOUT page will show the receiver ID.

The start up procedure can take several minutes

expecially when the receiver is used for the first

time. In this case the EKP IV / GPII+ should be

left powered on and connected to the receiver

until the first WX XM products are received.

Once the procedure is finished, timers will start

showing the age of each received products in

the XM WEATHER ABOUT page.

NOTE: A subscription to WX XM

service is needed for products to receive

data.

Table of Contents