Programming Table For System Features; Programming Table For Remote Controls - Avital Avistart 3001 Installation Manual

Programming Table for System Features

Feature
Remote Start Pre-Ignition
2 or 15 Seconds
Temperature-Controlled
Starting
OFF or 5°F (-15°C)
1 Pulse/2 Pulse Lock
1 Pulse/2 Pulse Unlock
Temperature-Controlled
Starting
-7 F (-20 C) or -22 F
(-30 C)
Mandatory RPM
Programming

Programming Table for Remote Controls

Feature
Door Lock
Door Unlock
Remote Engine Start
Remote Engine Stop
Temperature-Controlled
Remote Engine Start
One Step Remote Control
Code Learning
Instant Remote Control
Code Deletion
© 1999 Avital Technologies, Inc., A Division of Clifford Electronics
Part Num ber: 32- 3001B/AviStart 3001IM/ 1099
AviStart 3001 Installation Manual, Revision B 100199
Factory No. of
Setting beeps
2 Seconds 4
OFF 5
1 Pulse 6
beep once for 2 pulse, twice for 1 pulse.
1 Pulse 7
beep once for 2 pulse, twice for 1 pulse.
— 8
— 9 parking lights flash twice to confirm the
Factory No. of
Setting beeps
C 10
Button
11
D
Button
l 12
Button
L 13
Button
l 14
C
+ Buttons
C 15
Button
— 16
Secondary Action
Wait 3 seconds, the piezo beeper will
beep once for 15 seconds, twice for 2
seconds
Wait 3 seconds, the piezo beeper will
beep once for OFF, twice for 5°F
(-15°C)
Wait 3 seconds, the piezo beeper will
Wait 3 seconds, the piezo beeper will
Wait 3 seconds, the piezo beeper will
beep once for -7° F (-20°C), twice for
o
-22 F (-30° C)
Press and hold the START button until
RPMs have been learned.
Secondary Action
Press the C Button, the piezo
beeper will beep 1 time.
D
Press the Button, the piezo
beeper will beep 1 time.
l
Press the Button, the piezo
beeper will beep 2 times.
L
Press the Button, the piezo
beeper will beep 3 times.
C
l
Press the + Buttons, the
piezo beeper will beep 4 times.
Press the C Button, the piezo
beeper will beep 1 time.
Wait 3 seconds, the piezo beeper
will beep twice. All codes are
erased out of memory.