Programming Table For System Features; Programming Table For Remote Controls - Avital AVISTART 2501 Installation Manual

Programming Table for System Features

Feature
Remote Start Pre-Ignition
2 or 15 Seconds
Mandatory RPM Programming

Programming Table for Remote Controls

Feature
Remote Engine Start
Remote Engine Stop
One Step Remote Control
Code Learning
Instant Remote Control
Code Deletion
16
AviStart 2501 Installation Manual - Rev. B 100199
Factory No. of
Setting beeps
2 Seconds 4
— 5
No. of
Factory Setting
beeps
Green START
6
Button
Red STOP Button 7
Green START
8
Button
— 9
Secondary Action
Wait 3 seconds, the piezo
beeper will beep once for 15
seconds, twice for 2 seconds
See "Mandatory RPM
Programming" on page 14.
Secondary Action
Press the Green START Button, the
piezo beeper will beep 1 times.
Press the Red STOP Button, the
piezo beeper will beep 2 times.
Press the Green START Button, the
piezo beeper will beep 1 time.
Wait 3 seconds, the piezo beeper
will beep twice, all codes are
erased out of memory.