Programming Table for System Features
Feature
Door Lock/Unlock
Output Duration
1 Second
1 or 3 Seconds
2 Pulse Unlock
Ignition-Controlled
Door Lock/Unlock
0 or 3 Second Delay for
Ignition-Controlled
0 Second
Door Lock
RPM Door Lock
Passive Starter Disable
Remote Lock Starter
Disable
Horn/Siren Output
Mandatory RPM
Programming
Remote Start Run Time
20 or 30 Minutes
Remote Start
Pre-Ignition
2 Seconds
2 or 15 Seconds
Temperature-Controlled
Starting
OFF or 5 F (-15 C)
Temperature-Controlled
Starting
-7 F (-20 C) or -22 F
(-30 C)
AviStart 4500 Installation Manual - 0898 Rev. A
Factory
No. of
Setting
Beeps
Wait 3 seconds, the piezo beeper will beep
4
once for 3 seconds, twice for 1 second.
Wait 3 seconds, the piezo beeper will beep
1 Pulse
5
Wait 3 seconds, the piezo beeper will beep
ON
6
Wait 3 seconds, the piezo beeper will beep
7
once for 3 seconds, twice for 0 seconds.
Wait 3 seconds, the piezo beeper will beep
OFF
8
Wait 3 seconds, the piezo beeper will beep
OFF
9
Wait 3 seconds, the piezo beeper will beep
ON
10
Wait 3 seconds, the piezo beeper will beep
Horn
11
See "Mandatory RPM Programming"
12
20
Wait 3 seconds, the piezo beeper will beep
13
Minutes
once for 30 minutes, twice for 20 minutes.
Wait 3 seconds, the piezo beeper will beep
14
once for 15 seconds, twice for 2 seconds.
Wait 3 seconds. The piezo beeper will beep
OFF
15
once for OFF, twice for 5 F (-15 C).
Wait 3 seconds. The piezo beeper will beep
—
16
once for -7 F (-20 C), twice for -22 F
Secondary Action
once for 2 pulse, twice for .
once for OFF, twice for ON.
once for OFF, twice for ON.
once for OFF, twice for ON.
once for OFF, twice for ON.
once for Siren, twice for horn.
on page 19.
(-30 C).
21