Programming Table For System Features - Avital 4000 Installation Manual

Programming Table for System Features

Feature
Door Lock/Unlock Output
Duration (1 or 3 Seconds)
2 Pulse Unlock
Ignition-Controlled Door
Lock/Unlock
Passive Starter Disable
Remote Lock Starter Disable
Horn/Siren Output
Mandatory RPM
Programming
Remote Start Run Time
20 or 30 Minutes
Remote Start Pre-Ignition
2 or 15 Seconds
Temperature-Controlled
Starting
OFF or 5 F (-15 C)
Temperature-Controlled
Starting
-7 F (-20 C) or -22 F
(-30 C)
AviStart 4000 Installation Manual - 8/98 Rev. B
Factory No. of
Setting Beeps
Wait 3 seconds, the piezo beeper will beep
1 Second 4
once for 3 seconds, twice for 1 second.
Wait 3 seconds, the piezo beeper will beep
1 Pulse 5
Wait 3 seconds, the piezo beeper will beep
ON 6
Wait 3 seconds, the piezo beeper will beep
OFF 7
Wait 3 seconds, the piezo beeper will beep
ON 8
Wait 3 seconds, the piezo beeper will beep
Horn 9
once for Siren, twice for Horn.
See "Mandatory RPM Programming"
10
20 Wait 3 seconds, the piezo beeper will beep
11
Minutes once for 30 minutes, twice for 20 minutes.
2 Wait 3 seconds, the piezo beeper will beep
12
Seconds once for 15 seconds, twice for 2 seconds.
Wait 3 seconds. The piezo beeper will beep
OFF 13
once for OFF, twice for 5 F (-15 C).
Wait 3 seconds. The piezo beeper will beep
— 14 once for -7 F (-20 C), twice for -22 F
Secondary Action
once for 2 pulse, twice for 1.
once for OFF, twice for ON.
once for OFF, twice for ON.
once for OFF, twice for ON.
on page 17.
(-30 C).
19