Controls-Touch Pads - GE ASH08 Owner's Manual & Installation Instructions

About the controlson the air conditionermmodels with touchpads.
Features and appearance will vary.
F1 LOW
F2 MED
F3 HIGH
IPOWE'_
TKMP
O
Air ConditionerControls RemoteControl
O0 FF
Turn,_ air conditioner on and off.
Oisplav
Shows tile set temperature, time remaining
on timer or tim speed (FI-LOW, F2-MEO or
F3-HIGH).
O MODE
Use to set tile air conditioner to COOL or
FANmode.
O Increase •/Decrease • Pads
Use to set temperature when in COOLmode.
0 FAN
Use to set the tim speed to LOW(FI), MED (F2)
or HIGH (F3).
0
@
TIMER
ON--When tile air conditioner is ott; it can be
set to automatically turn on in 1 to 12 hom_ at
its i)revious setting. Each touch will set the
time in hom_.
OFF_'_\qlen tile air conditioner is on, it can be
set to automaticall_ turn off in 1 to 12 hom_.
Each tOtlch will set tile
tillle in hotllS.
To cancel tile timex; press tile TIMERpad
until tile displa_ time disappeax_.
Remote Control Signal Receiver
Remote Control
!b To ensure proper operation, aim tile
remote control at tile signal receixer
on tile air conditione_:
iJi:: T ile remote control signal has a range of
( c up t ) 21 teet.
_: Make sure nothing is between tile air
conditioner and the remote control that
could block the signal,
::Ji:: Make stlre batteries are fl'esh and installed
correctly see the Care and CIoaning section.
4