GE ASH08 Owner's Manual & Installation Instructions page 14

Window InstallationInstructions.
Install the Air Conditioner in the Case
_] Slide the air conditioner into the case.
Reinstall the 2 screws remoxed earlier on each
side of the case,
] Place the botton_ ironer case gasket between the
bottom of the air conditioner and the inside
bottom oI the case, Fold up the ends on both
sides and push fl_em in.
Front of air
conditioner
Bottom inner
case gasket
_] Attach the fl'ont grille to the case b) inserting
the tabs on the grille into the slots on the fl'ont
of the case. Push the grille in until it snaps into
place.
,
0 ¢:::D@
Guide the lever carefully
through flTegrille as you
push it in.
] Secure the fl'ont grille to the case b_ re )lacing
the screw rein oxed in Step
3. If a screw
was not
removed in Step 3, secme the grille with a D'pe
A screw for models with a raise-up inlet grille or
a b'pe D screw tot models with a slide-out filte_:
The installation is now
complete.
14