AstroStart R SS-5225 User Manual page 7

CHARGING THE REMOTE CONTROL
1. Plug the AC adapter into a 110V AC outlet. Insert the mini-USB connector into the mini-USB port located on the side of the remote control (see figure 1,
page 5). The text field will display "CHARGE" to indicate that the remote control is charging (The remote remains operational while charging. It can
command the system).
2. Once fully charged, the text field will display "FULL".
3. The remote control is then ready for use. Disconnect the mini-USB end from the remote control first and then the AC adapter from the AC outlet.
Note
Warning!
BATTERY LIFE
The remote control has many features that make it one of the most unique remote controls on the market today, including superior long range communication.
The default feature settings provide for excellent battery charge duration. However, to maximize this duration between charges, the following suggestions will
help:
•
Turning Paging off. The remote will not wake up to check for messages with Paging off in the Setup Remote menu.
Caution! The remote will not receive alert messages from the system.
•
Turn Beeping off. The button beeps are off by default, but they can be turned on in the remote setup menu if desired. However, the melodies are
unaffected by the beeps settings and will still play normally.
BATTERY DISPOSAL
Directed Electronics cares about the environment. If you need to dispose of the battery, please do so in accordance with your
municipal requirements for battery disposal, or return it to Directed Electronics at:
(Shipping and/or handling costs are the sole responsibility of the owner/sender and will not be covered by Directed Electronics).
If the battery is excessively depleted when the charger is connected, functionality may be
delayed while it charges to the minimum voltage required to operate the display, after
which normal charging resumes.
NEVER connect the supplied AC adapter to products other than the remote control. It
is a high current device designed specifically for rapid charging and may cause
severe damage or explosion when connected to any other products.
Charging the battery when the temperature is below 0°C (32°F) or above 45°C
(113°F) may cause severe battery damage and/or reduce battery life. Avoid placing
the remote control in areas exposed to extreme cold or heat (direct sunlight) when
charging the battery.
Directed Electronics Canada Inc.
188, St. François-Xavier street,
Delson, Quebec
J5B 1X9
6