Presetting Stations Manually; Presetting Stations Automatically; Tuning To Preset Stations; Cd/Mp3/Wma/Aac - Alpine CDE-9881L Owner's Manual

Presetting Stations Manually

1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.

Presetting Stations Automatically

1
Press BAND repeatedly until the desired radio band
is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1
Press BAND repeatedly until the desired band is
displayed.
2
Press any one of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
8
-EN

CD/MP3/WMA/AAC

/ /ENT SOURCE/
(OPEN)
RTN
/ESC Rotary encoder

Playback

1
Press (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually, and the "DISC IN" indicator
lights up.
When a disc is already inserted, press SOURCE/
switch to the DISC mode.
The mode will change every time the button is pressed.
TUNER DISC iPod*
* Only when the iPod is connected.
3
While playing back MP3/WMA/AAC, press
select the desired folder.
Pressing and holding
continuously.
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
5
To pause playback, press
/
Pressing / ENT again will resume playback.
TITLE
4 5
to
TUNER
or
or will change folders
/ /ENT.
to