Acura 2010 TL Owner's Manual page 72

Low Tire Pressure/
TPMS Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.
: Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
178 and 181 .
This indicator has two functions:
1. If it comes on while driving, it
indicates that one or more of your
vehicle's tires are significantly low
on pressure.
You will also see a ''CHECK TIRE
PRESSURE'' message on the multi-
information display (see page
Check the tire pressure monitor on
the multi-information display and
determine the cause (see page
If this happens, pull to the side of the
road when it is safe, check which tire
has lost pressure on the multi-
information display, and determine
the cause. If it is because of a flat tire,
have the flat tire repaired as soon as
possible. If two or more tires are
underinflated, call a professional
towing service. For more
information, see page 570
2010 TL
Instrument Panel Indicators
2. If this indicator begins to flash,
there is a problem with the tire
490 ). pressure monitoring system
(TPMS). You will also see a
''CHECK TPMS SYSTEM''
message on the multi-information
489 ). display. The indicator continues to
flash for a while (approximately 1
minute), then stays on. If this
happens, have your dealer check
the system as soon as possible.
For more information, see page
488 .
.
69