Acura 2010 TL Owner's Manual page 107

Multi-Information Display
Adjust Alarm Volume
Select the warning alarm volume
from three levels.
You can choose this item to
customize from ''METER SETUP''
by pressing the INFO ( / ) button
repeatedly.
104
Press the SEL/RESET button to see
the selections.
Select the desired level by pressing
the INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
2010 TL
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ''SETTING INCOMPLETE''
message appears, go back to
''ADJUST ALARM VOLUME'' and
repeat the procedure again.